Your cart is currently empty
Nimbus – BNF kit
$399.00
FrSky receiver comes with Nimbus BNF by default. For Spectrum or FlySky receiver please send your request to info@aerodyne-rc.com
Nimbus BNF (Bind-and-Fly) if fully assembled drone main body, which includes:
- Full body carbon fiber Nimbus monocoque frame with fasteners and bottom lid (see Frame Only kit description for details)
- Powerful and smooth brushless motors, 2206 size class, 2300 kV
- Quad-blade 5040 propellers, 2 sets
- Extra high-quality Typhoon 4-in-1 ESC, blheli_s, 30 A, with current sensor
- Modern and fast F4 flight controller (Omnibus F4 v3) with OSD capability via Betaflight
- Foxeer Arrow V3 FPV camera with 2.5 mm lens. Perfect video
- 5.8 GHz Tramp HV video transmitter from Immersion RC. Best in class for FPV drone racing
- Full range, SBUS radio control receiver, XM+ from FrSky
- Robust and efficient circular polarization VTx antenna
Description
GENERAL SPECIFICATIONS:
- Type: FPV racing drone
- Size/class – 195 mm (distance between diagonal motors axes)
- 5 ” propellers
- Weight without battery – 340 gr
- Dimensions of main body: 170x170x100 mm
- IP54 ingress protection class
- Flight time: 3…10 minutes
- Battery: 4S Lipo up to 1550 mAh
- 5.8 GHz video transmitter
- Max speed: 160+ km/h
- Max flight distance: 1500m
FPV Gear:
- Immersion RC Tramp HV video transmitter: Smallest direct LiPo powered vTx. 5.8 GHz, adjustable power, pit mode, remote switching, TNR touch-free wand control. 40 standard channels including Race Band, built-in thermal protection, filtered 5V supply to camera.
- 650 TVL, 2.5 mm lens, HS 1195 super HAD II CCD Sony camera with built-in microphone. Wide dynamic range, day/night mode. Aluminum casing.
- Adjustable angle, 30-45-55 degrees
- 5.8 GHz circular polarization antenna
FLIGHT CONTROLLER:
- Omnibus F4.v3 is 32 bit STM32 processor
- Support Betaflight
- In-built OSD, configured via Betaflight
- 5V impulse BEC
ESC:
- 4-in-1, 4×30 A
- Max voltage from 6S batteries (22.2 V)
- blheli_s firmware
- DShot protocol support
MOTORS:
- Brushless, 2206 class, 2300 kV
- Wiring configuration: single-stranded, 2300 kV = 1 x 0.55 mm Delta DLRK
- Stator: 0.15 mm Nippon steel silicone
- 52H arc magnets
- Bearings: Japanese NSK
- Base casing material: AL 7075
- Bell cap material: AL 7075
- Weight: 28.5 gr
PROPELLERS:
- 5″ size, Quad-blade, Q5040 (DALPROP)
- Excellent quality balancing, low vibration
- High quality material, flexible and durable
- 5mm prop mount
Additional information
| Weight | 400 g |
|---|---|
| Dimensions | 19 x 19 x 11 cm |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.